Guaranteed on time delivery
Gayatri Tubes needs no introduction, as for many years we are one of the leading and well-established suppliers and manufacturers of Nickel 201 Sheet Plate / Structural. We are known to offer best quality Nickel alloy products. These Nickel Alloy 201 Sheet Plate / Structural resist attack from phosphoric acid and one can easily use it with nitric acid to carry forward any application. These plates do not get affected by any of the weak bases. Even in high concentration and extremely high temperatures bases cannot affect the utility of these nickel alloy sheets. If we expose these nickel sheets and plates to potent bases like sodium hydroxide in higher concentration and high temperature then, we can experience cracking and etching in it. This phenomenon becomes even more evident in the presence of chlorides and hypochlorite.
This alloy sheets exhibit greater resistance to alkaline solutions and neutrals as compared to other sheets in this category. Therefore, these sheets come with superior thermal and electrical properties. These Nickel sheets and plates are a poor conductor of electricity. They offer a significantly lower electrical conductivity as compared to copper. These are usually highly resistant to acid attacks but, their efficiency depends on the concentration of acid and temperature. These sheets and plates are nonferrous metals plates. They include nickel alloy and several additional contents in it. This grade of plates makes its toughness and strength superior as compared to other counterparts. Apart from this, they show remarkable resistance even at elevated temperature applications. These plates might suffer corrosion but its chemical and physical properties protect the alloy from many kinds of corrosions.
The physical and mechanical properties make Alloy 201 Sheet Plate / Structural apt to be in use in general construction, building heavy-duty bridges. To go with that it is used in various applications in petrochemical industries, shipbuilding and repair, heavy engineering and many more offshore and onshore services and applications. And we at Gayatri Tubes are always ready to ensure that our clients get these nickel sheets and plates without any hassles and in the safe packaging. They even moves through quality tests for the assurance of the clients.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel Alloy 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
| Specifications | ASTM B162 / ASME SB162 |
| Dimensions | ASTM, ASME, and API |
| Plates Thickness | thickness ranges from .0125" to 5.00" |
| Sheets Thickness | thickness range from .008" to .0125" |
| Sheets Plates Length | 2010mm, 2440mm, 3000mm, 5800mm, 2010mm, etc |
| Angle Size | 3/4″ THRU 8″ |
| Angle Thickness | 1/8″ thru 5/8″ |
| Beams Weight | 19.6 |
| Beams Length | 20′to 22′Random length |
| Channels Size | 30mm*15mm*15mm*1mm-300mm*150mm*150mm*30mm |
| Channels Diameter | 50x37x5mm |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel Alloy 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel Alloy 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
