Guaranteed on time delivery
Gayatri Tubes is one of the prominent manufacturers and suppliers of good quality 17-4 PH Rod, Bars, Wire, Wire Mesh. We are also known as exporters. We have products of different sizes and designs and also offer to make custom based designs for our customers. We follow standard procedures while manufacturing our products and so our products are certified.
17-4 PH is an alloy of stainless steel and is of precipitate hardening martensitic in nature. There are usually four types of steels present in alloying nature duplex, ferritic, austenitic and martensitic. They are usually made up of the two main composition factors the 300 series with prime composition of nickel. The other is the 300 series that has more manganese and nitrogen content in excess. This type of steel offers high resistance and improved performance when used in the application of shafts, pumps, and valves. The alloy also proves useful if applied in the areas of surgical blades, plastic injection molds and also in breathing nozzles. The addition of the elements such as boron, carbon, and titanium makes it survive in extreme high temperatures. They are one of the reliable alloys that are also used in manufacturing of the heavy turbines near Dams.
17-4 PH Rod, Bars, Wire, Wire Mesh are often used in such applications where corrosion is the main issue. They offer good resistance to corrosion. They have excellent toughness and strength to meet any requirements. They also perform well in high-temperature zones. They also have excellent mechanical and fabrication properties. They contain carbon, chromium, nickel, copper, phosphorous, silicon, manganese. They also contain a mixture of columbium and tantalum. The wires made of such alloy are ductile and have good conductivity.
Bars, rods, wires and wire mesh found application in many industries. They are sugar industries, oil and gas industries, petrochemical and power plant industries. They are also used in chemical, fertilizer, dairy foods, and beverage industries. They are also used in aerospace applications, jet engines and also in surgical equipment. We manufacture the best quality of 17-4 PH Rod, Bars, Wire, Wire Mesh. We also have adequate stock of our products to fulfill any demands of costumers within time limits. We ensure the safe packaging and transportation of our products.
| STANDARD | UNS | WERKSTOFF NR. |
| 17-4 PH | S17400 | 1.4542 |
| Specifications | ASTM A276, A580 / ASME SA276, SA580 |
| Standards | DIN, ASTM, ASME, BS and all International Standards |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Diameter | Outside Diameter in the range of 4mm to 500mm |
| Width | 1m to 48″ |
| Hex Bars | 18mm – 57mm (11/16″ to 2-3/4″) |
| Square Bars | 18mm – 47mm (11/16″ to 1-3/4″) |
| Flat Bars | 1/2” to 10” in the thickness range of 2mm to 150mm, |
| Wire Length | Max 12000 mm |
| Wire Mesh Length | 30m to 100″ |
| Wire Diameter | 5.5 – 400 mm |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging, Wire Mesh, Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh, Spring Steel wire mesh, Fencing Wiremesh Etc |
| Grade | C | Ni | Si | S | Mn | P | Cr | Cu | |
| SS 17-4 PH | min. | - | 3.0 | - | - | - | - | 15.00 | 3.0 |
| max. | 0.07 | 5.0 | 1.00 | 0.03 | 1.0 | 0.04 | 17.5 | 5.0 | |
| Grade | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| 17-4 PH | 135 | 16 | 105 | 277 |
