Guaranteed on time delivery
Gayatri Tubes is the leading exporter, manufacturer, stockiest, of SS 316TI Fasteners. We are also a verified whole seller of all kinds of stainless steel. SS 316TI Fasteners are made with the composition of carbon, magnesium, phosphorus, silicon, chromium, molybdenum, nickel, nitrogen, and sulfur. These fittings are made with the specification of ASTM A 193 ASME SA193 also it has many types like acorn nuts, panel nuts, square bolts, u bolts, lag bolts, counters sunk bolts, eye bolts, hex head bolts, wing nuts, t nuts, and locknuts. Their lengths are mainly with 3mm to 200mm with all international standards. SS 316TI Fasteners have an electrical resistivity of 720nm with a grade of 316Ti. Its elastic modulus is 193 Gpa and a density of 8000 kg/ m3. SS 316TI Fasteners also have the specific heat up to 0- 1000c.
SS 316TI Fasteners is applicable in many industries like pharmaceutical companies, seawater equipment, specialty in chemicals, heat exchanger, pulp and paper industry, gas processing industry, power generation, condensers, pharmaceutical equipment, chemical equipment, and off-shore oil drilling companies. There is also some of the application of the SS 316TI Fasteners industries processing food, petroleum and petrochemical refineries, thermal process plant, cement/centering plants, coal gasifier internals, steel melting equipment and many more. SS 316TI Fasteners are very useful as tube hangers, coal combustors, recovery system flares and many more. This fitting has amazing mechanical strength, elevated temperature, weldability, stress rupture, corrosion resistance, and higher tensile strength, pitting, and made with high carbon grades. This fitting is titanium-based of version 316 which gives it the aqueous resistance from the sensation corrosion. Due to the higher level of nickel in SS 316TI Fasteners, it is also used in marine environments, and also it varies in higher resistance. Due to the lower amount of carbon in SS 316TI Fasteners, it can withstand the higher temperatures.
SS 316TI Fasteners products are being tested by flaring test, pitting resistance test flattening testy and many more tests. Our product is certified by all the tests and report like 100% radiography test reports. Raw material certificate, certificate of compliance, and also third party inspection report and many more.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
| Specifications | ASTM F593, F1554 / ASME SF593, F594, F1554 |
| Standard | DIN, ASTM, BS and all International Standards |
| Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Bolt / Screw Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Machine Screws Size | M1.6 - M12 |
| Self Tapping Screw Size | No.2 - No. 14 |
| Length | 3 mm to 200 mm |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316Ti | 0.08 max | 2.0 max | 0.75 max | 0.045 max | 0.030 max | 16.00 - 18.00 | 2.00 - 3.00 | 10.00 - 14.00 | 68.395 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
