Guaranteed on time delivery
Gayatri Tubes is a well-known supplier and manufacturer of SS 317L Sheet Plate / Structurals. We offer superior quality products to our diverse group of clients. Stainless Steel 317L Sheet Plate / Structurals contains a fair amount of molybdenum which gives it similar properties to nickel. It is austenitic steel and has low carbon content as compared to its counterparts. The addition of molybdenum, nickel, and chromium makes it better resistive to all kinds of corrosion. This also makes it better prepared for acid attacks by sulfuric, acetic, formic, citric and other acids. Due to its low carbon content, it offers high resistance to sensitization. It also offers higher creep, high tensile strength, and stress to rupture even at very high temperatures. When it is annealed condition these sheets are non-magnetic but these can become slightly magnetic after welding.
Austenitic Stainless Steel 317L Sheet Plate / Structurals offers high level of corrosion resistance even in difficult environments. These environments are the effect of chemicals like acidic and chlorides. As it contains low carbon content so it offers high resistance to inter granular corrosion and compared to others in the same family. It shows a tendency to counter to pit if comes in contact with chlorides, iodides and other acids. These sheets and plates offer excellent resistance to oxidation. It is known for demonstrating a lower rate of scaling in normal atmospheric conditions. It is suitable for the majority of welding and forming applications that is why it is popular amongst clients. This alloy works smoothly at low speeds and constant feeds. It is tougher to use than 304 grades hence uses of chip breakers become important.
These are widely and commonly used to handle acid dyestuffs and acetylating. Apart from that industries use these in nitrating mixtures, pulp liquor, bleaching solutions, sulfur. In addition to that it also finds its utilization in handling severe coal and oil, and many chemical compounds. Some of the industries that use this product for their applications are paper and pulp handling, several chemicals, and petrochemical applications, in food processing equipment, textile equipment and in condensers in fossil and nuclear-fueled power generation stations. We at Gayatri Tubes are always ready to serve the need of our esteemed clients.
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
| Specifications | ASTM A240 / ASME SA240 |
| Dimensions | ASTM, ASME, and API |
| Sheets Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Sheets Plates Thickness | 4mm-100mm |
| Sheets Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Angle Size | 3/4″ THRU 8″ |
| Angle Thickness | 1/8″ thru 5/8″ |
| Beams Weight | 19.6 |
| Beams Length | 20′to 22′Random length |
| Channels Size | 30mm*15mm*15mm*1mm-300mm*150mm*150mm*30mm |
| Channels Diameter | 50x37x5mm |
| Surface Finish | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 - 20.00 | 3.00 - 4.00 | 11.00 - 15.00 | 57.89 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
