Guaranteed on time delivery
Gayatri Tubes is well known as a manufacturer and supplier of Inconel 601 Flanges with different shapes and sizes. We used high standards and specifications while manufacturing our product and provide flanges in all grades. We are exporter and wholesaler of flanges in different dimensions, diameters, lengths, thicknesses, and radius. Inconel 601 is basically chromium nickel alloy that is used in many application where need high corrosion and heat resistance. Due to nickel content, the grade 601offers resistance to oxidation at the high temperature like 2200 degrees F. Grade 601 offers resistance to spalling under severe thermal condition. Inconel 601 has many features such as high temperature strength, heat resistance, good tensile strength, resistance to corrosion, resistance to stress corrosion chloride cracking, resistance to crevice and pitting corrosion, etc.
There are many types of Inconel 601 Flanges are available like socket weld flanges, slip-on flanges, threaded flanges, forged flanges, lap joint flanges, neck weld flanges, etc. Flanges are used to connecting two pipes and tubes equipment together like pumps, valves, pipes, etc. Through this flanges easy to accessing the pipes to many application like cleaning, inspecting, of pipes. The threaded Inconel 601 flanges have many properties like corrosive resistance, mechanical and tensile strength, resistance to intergranular corrosion. The Inconel 601 long weld neck flanges are used in aerospace and spacecraft equipment because it is resistant to corrosion in carbon nitriding condition. This flange is a non-magnetic in the annealed condition and the long neck joint flanges become hardened by the cold working process. The nippo Inconel 601 flanges have high resistance to carburization and have good creep rupture.
Inconel 601 Flanges are used in a number of companies and commonly used in many engineering works. These flanges are used in chemical, power generation, petrochemical, paper and pulp, marine, chemical fertilizer, etc. The flanges are also used in boiler equipment, chemical equipment, surgery equipment, and so many. Before delivery our product we apply different types of tests to check the quality of Inconel 601 Flange. We have done the following test mechanical test, chemical test, macro test, impact test, intergranular test, hardness test, toughness test, and many other tests. We also offer the best packaging facility in different forms.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
| Specifications | ASTM B564 / ASME SB564 |
| Dimensions | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Size | 1/2″NB TO 60″NB |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| DIN Flanges | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| JIS Flanges | JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K |
| BS Flanges | BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
